We help the world growing since 2015

2017 wholesale price Green Heat Pump - Slaughterhouse High Temperature Heat Pump – Sunvi

Short Description:

Application : Air energy is a form of renewable energy. Air source heat pump water heater is a new type of green energy industry. Compared with traditional gas and electric water heater products, it is not only safe but also energy-saving and environmentally friendly. Even when compared with solar energy, it has obvious advantages. It changes the way traditional solar energy products rely on direct sunlight or radiation to collect energy. The low-temperature heat energy in the air is extracte...


Product Detail

Product Tags

Related Video

Feedback (2)

We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Plastic Pool Heater , Play Swimming Pool Heat Pump , Commercial Pool Heating Pump , As a key enterprise of this industry, our corporation makes attempts to become a leading supplier, depending on the faith of expert excellent & throughout the world assistance.
2017 wholesale price Green Heat Pump - Slaughterhouse High Temperature Heat Pump – Sunvi Detail:

Application :
Air energy is a form of renewable energy. Air source heat pump water heater is a new type of green energy industry. Compared with traditional gas and electric water heater products, it is not only safe but also energy-saving and environmentally friendly. Even when compared with solar energy, it has obvious advantages. It changes the way traditional solar energy products rely on direct sunlight or radiation to collect energy. The low-temperature heat energy in the air is extracted by the reverse Carnot cycle principle, and the high-temperature heat energy is converted by medium gasification compression to achieve hot water supply. Its features include:
(1) High-efficiency and energy-saving: The air source water heater obtains the free heat energy in the air through a large amount of electricity. The power consumed is only the energy used by the compressor to carry the air energy. Therefore, the thermal efficiency is as high as 380%-600%, and the same amount of hot water is produced. The cost of using air source water heaters is only 1/4 of that of electric water heaters, 1/3 of gas water heaters, and 1/2 of solar water heaters. High thermal efficiency is the biggest feature and advantage of air source water heaters. When energy problems become a world problem, this is the most important reason why air source water heaters have become “fourth generation water heaters”.
(2) Green, safe and reliable: the unique use principle of air source water heaters to achieve complete hydropower separation during the work process, to fundamentally eliminate leakage accidents; and because it does not require any fuel consumption during use, no fuel leakage, etc. Causes fire, explosion, poisoning, etc.; it changes the traditional solar energy products only rely on direct sunlight or radiation to collect energy, using the refrigerant inside the equipment to collect heat from the natural ambient air and heat the cold water through the heat exchanger; The air source water heater does not emit any toxic gases, greenhouse gases and acid rain gas during the work, and there is no heat pollution.
(3) Easy to use automatic control: The air source water heater is automatically operated by microcomputer control, set the water temperature according to the need, automatically start and stop the on/off time, has the memory function, does not need special personnel, and combines its timing switch function to realize low valley electricity. Achieve more economical use.

Air-cooled water chiller parameters

Model

QFJ-5S

QFJ-8S

QFJ-10S

QFJ-12S

QFJ-16S

QFJ-20S

QFJ-25S

QFJ-30K

Refrigerating capacity

KW/h

14.5

24.5

30.5

36

49

61

72

90

KCal/h

12468

21066

26225

30954

42132

52451

61909

77386

Btu/h

49488

83618

104096

122867

167235

208191

245734

307167

Power Supply

3P-380V/50Hz

Throttling mode

Thermal Expansion Valve/Capillary

Input power KW

5.2

8.4

10.7

12.8

17.3

21.2

25.6

31.6

Energy efficiency ratio

2.78

2.91

2.85

2.8

2.83

2.87

2.81

2.84

Compressor

type

Fully enclosed scroll/semi-enclosed piston

Number

1

2

Energy regulation

0-100%

0-50%-100%

Condenser

structural style

V-Fin (High Efficiency Internal Threaded Copper Tube)/Ejector

Inlet and outlet temperature

Inlet air 40℃/outlet water 50℃

Ventilation(m³/h)

2×3400

2×3900

2×6570

2×8700

2×10820

2×10820

3×10820

3×12200

Fan diameter

400

450

500

550

600

600

600

630

Fan quantity

2

2

2

2

2

2

3

3

Evaporator

structural style

High Efficiency Internal Thread, Square Shell/Shell Tube

Freezing water temperature

Influent 18℃/effluent 13℃

Frozen water flow(m³/h)

2.5

4.2

5.2

6.2

8.4

10.4

12.3

15.4

Inlet and outlet pipe diameter (DN)

32

40

50

Protection mode

Leakage protection, reverse protection of power supply, phase absence protection, motor overcurrent protection, compressor overheating protection, system pressure abnormal protection, oil level abnormal protection, exhaust temperature abnormal protection, system water shortage protection and so on.

Size (CM)

L

114

146

140

160

200

204

248

275

W

78

78

96

96

96

96

96

96

H

151

154

175

175

175

177

177

185

Weight

KG

228

295

345

360

525

605

680

766

Note: Above parameters: evaporation temperature 7.2℃、condensation temperature 54℃、ambient temperature 35℃.

 

Air-cooled chiller parameters (anti-corrosion type)

Model

QFZ-5B

QFZ-8B

QFZ-10B

QFZ-12B

QFZ-16B

QFZ-20B

QFZ-25B

QFZ-30B

Refrigerating capacity

KW/h

16

26

34

40

52

68

80

100

KCal/h

13758

22356

29235

34394

44712

58469

68788

85985

Btu/h

54608

88737

116041

136519

177474

232082

273038

341297

Power Supply

3P-380V/50Hz

Throttling mode

Thermal Expansion Valve/Capillary

Input power KW

5.3

8.5

10.8

12.9

17.5

21.3

25.6

31.9

Energy efficiency ratio

3.01

3.05

3.14

3.1

2.97

3.19

3.12

3.13

Compressor

type

Fully enclosed scroll/semi-enclosed piston

Number

1

2

Energy regulation

0-100%

0-50%-100%

condenser

structural style

V-Fin (High Efficiency Internal Threaded Copper Tube)/Ejector

Inlet and outlet temperature

Inlet air 40℃/outlet water 50℃

Ventilation(m³/h)

2×3400

2×3900

2×6570

2×8700

2×10820

2×10820

3×10820

3×12200

Fan diameter

400

450

500

550

600

600

600

630

Fan quantity

2

2

2

2

2

2

3

3

evaporator

structural style

High Efficiency Stainless Steel (316L) or Titanium, Shell and Tube/Square Shell

Freezing water temperature

Influent 18℃/effluent 13℃

Frozen water flow(m³/h)

4.6

7.5

9.7

11.4

14.9

19.5

22.9

28.7

Inlet and outlet pipe diameter (DN)

32

40

50

Protection mode

Leakage protection, reverse protection of power supply, phase absence protection, motor overcurrent protection, compressor overheating protection, system pressure abnormal protection, oil level abnormal protection, exhaust temperature abnormal protection, system water shortage protection and so on.

Size (CM)

L

114

146

140

160

200

204

248

275

W

78

78

96

96

96

96

96

96

H

151

154

175

175

175

177

177

185

Weight

KG

230

310

340

355

530

615

700

785

Note: Above parameters: evaporation temperature 10℃、condensation temperature 54℃、ambient temperature 35℃.

bb
With its unique advantages and good economic benefits, air-energy water heaters are widely used in domestic hot water fields such as family, villas, institutions, schools, hotels and residential district heating. Special designs for special occasions are widely used in constant temperature swimming pools, aquaculture, food factories, slaughterhouses, textile printing and dyeing factories, electroplating factories and oxidation plants. Factory high temperature hot water and other industrial hot water fields.
(1) Constant temperature swimming pool
There are two kinds of swimming pools: outdoor swimming pool and indoor warm water swimming pool. From the nature of the use of swimming pools, there are competition pools, training pools, diving pools, swimming pools, as well as swimming pools in private villas. However, no matter what kind of swimming pool, there is a requirement to maintain the constant temperature of the pool water. The temperature of the pool water varies with the nature of its use. Generally, the temperature of indoor swimming pool water is 24-29 C, the relative humidity is 50-60%, and that of outdoor swimming pool water is 22-30 C. If the indoor air-conditioning and heating facilities are perfect, it can be taken at 25 C; if the temperature is low, it can be taken at 27 C. The heat loss is related to the temperature of the pond water and the ambient temperature. Generally, the indoor ambient temperature is 1 ~ 2 C higher than that of pool water.
According to the characteristics of high temperature, high humidity and corrosiveness of the swimming pool, the difference between the special thermostat unit and the common unit is as follows:
1) High water quality requirements
According to the relevant national standards, in order to ensure sanitary conditions, disinfectants such as chlorine and copper sulfate need to be added regularly, and these components are highly corrosive to metals. Therefore, the swimming pool air source heat pump is made of titanium alloy, stainless steel, copper-nickel, copper-aluminum alloy materials with excellent corrosion resistance.
2) Low temperature of effluent and high efficiency of unit
Standard swimming pool water temperature requirements are 26 to 29 degrees Celsius, which can be easily achieved for air source heat pumps. In view of the low condensation temperature, it is suggested that the design of the condenser should be slightly smaller. Under the normal operation of the swimming pool, the efficiency of the air source heat pump unit in the swimming pool is relatively high, and it can generally reach more than 550% at the ambient temperature of 20 degrees Celsius.
3) High water flow
In order to improve the efficiency of the system, ordinary heat pump water heaters usually control the flow rate of the pump. The temperature difference between the inlet and outlet of the condenser is 5 C. But in the swimming pool, such temperature difference is enough to make swimmers feel uncomfortable. Therefore, in order to reduce the temperature difference and increase the flow rate of circulating water, air source heat pump uses special heat exchangers to increase the flow resistance, and ultimately to reduce the temperature difference and keep the water. Temperature is stable.
 
After-sales service is solemnly committed to the principle of improving customer satisfaction:
1. The company establishes complete data files for the products sold, and has a professional and capable after-sales team to provide all-round tracking service and excellent after-sales service.
2. According to the actual needs of users to provide a complete use and design plan from equipment selection to site design, engineering installation, after-sales service as a whole.
3. At any time to solve the task technical problems for you, the company will regularly visit the status of equipment use; after-sales service team will periodically inspect, prevent trouble before it happens, so that you truly experience excellent service quality.
4. Carry out timely after-sales maintenance and maintenance services in strict accordance with the after-sales service terms. The free warranty period is one year, and the maintenance of spare parts is provided free of charge during the warranty period.
5. Lifelong maintenance, equipment failure after expiration of the warranty period, damaged parts are only charged at ex-factory price.


Product detail pictures:

2017 wholesale price Green Heat Pump - Slaughterhouse High Temperature Heat Pump – Sunvi detail pictures

2017 wholesale price Green Heat Pump - Slaughterhouse High Temperature Heat Pump – Sunvi detail pictures


Related Product Guide:
Johnson Controls Brings Innovative Technologies to Data Centers My Account Sign In Register ico-supplier ico-white-paper-case-study ico-product ico-cad | Water Cooled Screw Chiller
Europe Air Source Heat Pump Market 2018-2024: Market is Projected to exceed $7bn by 2024 | Multifunctional Heat Pump

We usually believe that one's character decides products' high quality, the details decides products' excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for 2017 wholesale price Green Heat Pump - Slaughterhouse High Temperature Heat Pump – Sunvi, The product will supply to all over the world, such as: Pretoria, Australia, Netherlands, Strong infrastructure is the need of any organization. We are backed with a robust infrastructural facility that enables us to manufacture, store, quality check and dispatch our products worldwide. To maintain smooth work flow, we have sectioned our infrastructure into a number of departments. All these departments are functional with latest tools, modernized machines and equipment. Owing to which, we are able to accomplish voluminous production without compromising upon the quality.
  • The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Dale from Brisbane - 2015.12.10 19:03
    Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Afra from US - 2015.07.12 12:19

    Related Products